Tools and accessories
HS ROLLERS
ROLLER HS, this device is essential for supporting the pipes while they are being welded with the butt fusion machines. The rollers minimise pipe friction and drag force no matter which is the construction site condition.
REROUNDER
Rerounder the mechanical thread of these steel-made products help remodel the ends of ovalized pipes that need to welded by electrofusion.
The manual clamping of the tool stems pushes the ovalized end till its reshaping respects the ovalization range required by most standards, therefore allowing its insertion into an electrical coupling - and avoiding the cost of eliminating a good pipe.
The 3 rerounders cover the following diameters range:
250-400 model for OD from 250 to 400 mm;
450-560 model for OD from 450 to 560 mm,
630-800 model for OD from 630 to 800 mm.
Each one of them is sold separately, with a steel transport box.
RED - external debeader
RED - Ritmo External Debeader
Intuitive, Easy to use, Accurate, Versatile.
For pipes up to 1200 mm and sheets
PIPE CUTTERS
PIPE CUTTERS are professional tools, essential for the manual cut of plastic pipes up to Ø 315 mm.
The TC 108, T1, TU 75, TU 140, T3 and T4 pipe cutters are made with the very best alloys, and are very manageable and practical to use.
The pipe cutters can be fitted with various special blades with appropriate cutting heights and penetration capacities to cut pipes of different materials. The TC 108 and T1 pipe cutters (with special blades) can cut Copper (Cu) and multilayer (PEx/Al,PPr/Al, etc.) pipes.
STANDARD COMPOSITION
- Pipe cutter with blade:
- TC 108 + blade Ø 22 mm + blade Ø 18 mm
- T1 + blade Ø 25 mm
- TU 75 + blade Ø 44 mm
- TU 140 + blade Ø 53 mm
- T3 + blade Ø 53 mm
- T4 + blade Ø 53 mm (HDPE 80 - HDPE 100: Ø 250 SDR 13>; Ø 315 SDR 17,5 >)
- Carrying case (for the T4 pipe cutter, only)
ON REQUEST (ACCESSORIES)
- Blades of different diameters and heights
MAYA 20-63
MAYA 20-63, manual tool for beveling the ends of plastic pipes for electrofusion, socket fusion, pipe connection.
Maya 20-63 covers a range from 20 to 63 mm.
Compact and lightweight this chamfering tool proves to be a useful tool to always have in the toolbox.
Pipe support
Light equipment capable of supporting and holding the pipes in position allowing quick pipe cutting, scraping, cleaning, etc.
KELA 16-63
Kela is a universal and compact aligner suitable for plastic pipes, fittings and electrofusion saddles.
Thanks to its particular clamp design, it is possible to aligne pipes and fittings in a straight position or at 45° and 90°
ROLLER 1000
Butt Fusion for Pressure Pipe
ROLLER 1000 is essential for supporting the pipes while they are being welded with the butt fusion machines.
RID-internal debeader
Butt Fusion for Pressure Pipe
Internal Debeader by RITMO S.p.A. covering a range from Ø 90 up to 630 mm (3" IPS ÷ 24" IPS).
Aligner Eco 63-180
ALIGNER ECO 63 – 180 is an essential and professional tool for the alignment and support of pipes during electrofusion from Ø 63 mm to 180 mm.
Aligner ECO 20-63
ALIGNER ECO 20-63 is composed by two aluminum axes on which are mounted self-centering clamps made of steel.
Aligner 125-500
ALIGNER 125 – 500 is an essential and professional tool for the alignment and support of pipes during electrofusion from Ø 125 mm to 500 mm.
THE INSPECTOR
ALERTS AND RECORDS DURING THE WELDING CYCLE
- APPLICABLE TO RITMO MACHINES AND OTHER